[. . . ] You can now use the software of your choice to view, edit, or print the images. Start button Note: For help with EPSON Smart Panel, click the question mark in the lower right corner of the screen. USB cable scanner software CD power cord AC adapter film holder The contents may vary in certain locations. Click this arrow if the Scan to File icon does not appear. Using the Scanner Buttons A progress meter appears on the screen and your photo is automatically scanned. If you want to scan another photo, place it on the document table, close the integrated TPU, then click Scan More. [. . . ] Whenever you unplug the scanner, wait at least 10 seconds before plugging it back in. Rapidly plugging and unplugging the scanner can damage it. Storing the Film Holder When not using the film holder, you can store it inside the integrated TPU. Open the integrated TPU and remove the document mat. Connect the integrated TPU connector to the scanner's option connector. It turns on when you connect the AC adapter and then plug in the power cord. The ] Start button blinks green until the scanner finishes warming up, then stops blinking and stays green. This indicates that the scanner is ready for use. Note for Windows users: If the EPSON Installation Program dialog box does not appear, double-click the My Computer icon. exe. Note: The ] Start button light turns off if you do not use the scanner for 15 minutes. Connect the square connector on the USB cable to the USB port on the back of the scanner. Then connect the other end of the USB cable to any available USB port on your computer. Safety Instructions Read all these instructions and save them for later reference. Follow all warnings and instructions marked on the scanner. integrated TPU connector transportation lock option connector 4. Plug the other end of the power cord into an electrical outlet. c Plug this end of the USB cable into your computer. c Caution: It is not possible to change the AC adapter's input or output voltage. If the label on the AC adapter does not show the correct voltage, contact your dealer. Do not plug in the power cord. DC inlet USB port Note: AC adapter power cord Do not connect the scanner through any hubs. To turn off the scanner, unplug the power cord from the electrical outlet. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SEIKO EPSON CORPORATION. The information contained herein is designed only for use with this EPSON scanner. [. . . ] Use only the type of power source indicated on the AC adapter's label, and always supply power directly from a standard domestic electrical outlet with the AC power cord that meets the relevant local safety standards. Avoid using outlets on the same circuit as photocopiers or air control systems that regularly switch on and off. If you use an extension cord with the scanner, make sure the total ampere rating of the devices plugged into the extension cord does not exceed the cord's ampere rating. [. . . ]